Interior Moldings
Please call us @ 715-387-6847 to place an order.
HomeAbout UsRequest A CatalogLow Profile MoldingsNew ProductsEventsAir Cleaners/ScoopsNerf BarsContact UsCustom WorkMoldingsTube BumpersInterior MoldingsPersonal Projects

Our moldings have a multitude of possibilities. Moldings are half round solid stainless steel and sold by the linear foot. The moldings are machined from solid, type 304 stainless steel and polished to a mirror finish.

3/4" is $25/foot
5/8" is $23/foot
1/2" is $18-$21/foot (See Below)
3/8" is $24/foot
1/4" is $23/foot
1/2" is sold by total linear footage of order and is as follows:
Up to 3 feet is sold at $21/foot.
3-10 feet is $20/foot.
10-20 feet is $19/foot.
Over 20 feet is $18/foot.
Call for quote.

1/2" Low Profile Molding works great for Interior Moldings also! More information on the "Low Profile Moldings" page.

The four pictures below are examples of end configurations for the moldings. Diagonal is also available. Mounting studs are recommended for door panels and applications outside of your ride. The studs are $5 each and one is pictured below.

Bullet (pointed) shaped end
Rolled shaped end
Rounded shape end
Straight shaped end
This is an example of a 8-32 stud. 6-32 studs are also available.

This is an example of the quarter inch molding used for interior trim on a door panel.
Proud to say, we supplied the moldings for the 2015 NSRA Giveaway Car pictured above.
Ed Sears, 41 Ford, used our moldings in this beautiful interior and running boards. (Built by One Off Rod & Custom, Delaware.)
Doug Walt used 1/4" strips to dress up his LS7 engine cover.
Brian Beatie added 3/8" strips to his engine cover for a nice finishing touch.
The dash pictures above and on the right are from a 1937 Ford Hardtop Roadster owned by Bruce Gaston, Sr. in PA.
Above and on the left are examples of the quarter inch molding on a Nash door panel, console and headliner. Photos are courtesy of Denny's Rod Shop in Abbotsford, WI.
Below are four pictures of a 37 roadster with quarter inch interior trim. Photos are courtesy of LB Custom Interiors from Louisville, KY.

These next six pictures are from our 41 Studebaker "LOGO" car. The first two are door panels. The picture below on the left is the headliner and the next picture is the trunk lid following the same theme. The other picture on the right is the interior trunk.

The two interior molding pictures shown above are of a 1948 Chev Business Coupe owned by Mr. & Mrs. Bruce W. Gaffney located in CT.

Check out the interior pictures below of a 1962 Impala installed by Audio Designs from Madera CA.